TA Technix Suspension + Control Luft-Kit 11,5L Tank for Dodge Challenger Coupe
Ta technix Air suspension + control air kit 11.5L tank for Dodge Challenger Coupe. Huge product selection, over 18000 products in the range. Huge amount of stock items, immediately available. The electronic, pressure-based control unit has the option of storing 4 freely configurable bellows pressures / ride heights per axle.
With the help of the enclosed operating instructions and the simple menu navigation, the following additional functions can be used: - 4 ride heights - Setting the ride height with ignition on and off (Autolevel) - Axle-by-axle adjustable overshooting of the bellows pressures for optimal adjustment of the ride height - Protection against unauthorized use (offers the possibility to lock the system to the desired ride height within 3 seconds) - maximum and minimum tank pressure (adjustable) - Protection of the on-board network by definable upper and lower limits of the on-board voltage - Freely configurable valve times - Modification of the control unit lighting / ECU lighting - Minimum pressure of the front and rear axle (undercut triggers an optical warning signal and is necessary for the TÜV registration). 1x multifunction display 1x knob / potentiometer including 4 caps in black, red, blue and silver 1x anti-reflective film 1x ready-made wiring harness 1x control unit / ECU 3x update cable 1x ta technix 444C compressor in chrome 1x 11.5 liter chrome tank 1x electronics set including 1x compressor relay Fuse holder including fuse 4x 2/2-way valves 1/4 with pressure sensors 1x 25 meter 6mm PU hose in black 1x all fittings including check valve and safety valve 1x water separator 1x emergency filling valve. Matching items are available in our Shop. Here you will also find a large selection of products that have already been optimally put together for your vehicle type. Ecommerce the way I want it. With the help of the enclosed operating instructions and the simple menu navigation, the following additional functions can be used: - Minimum pressure of the front and rear axle (undercut triggers an optical warning signal and is necessary for the TÜV registration) 1x multifunction display 1x knob / potentiometer including 4 caps in black, red, blue and silver 1x anti-reflective film 1x ready-made wiring harness 1x control unit / ECU 3x update cable 1x ta technix 444C compressor in chrome 1x 11.5 liter chrome tank 1x electronics set including 1x compressor relay Fuse holder including fuse 4x 2/2-way valves 1/4 with pressure sensors 1x 25 meter 6mm PU ho. Attention for buyers from the UK. If the value of the goods exceeds 135. Deliveries or imports that do not exceed a value of 135. (net and excluding transport costs) are exempt from import VAT in the UK. The description of this item has been automatically translated.